Back to Course
Raspberry Pi: Make a Workbench Automation computer
0% Complete
0/0 Steps
-
1 - Introduction7 Lectures
-
2 - Basic Setup6 Lectures
-
3 - More setup: enclosure and networking8 Lectures
-
4 - Taking photos and video with the RPi Camera7 Lectures
-
5 - Control with the Piface Relay+10 Lectures
-
6 - Environment monitoring with the DHT225 Lectures
-
7 - Controlling mains loads with an external relay7 Lectures
-
8 - Construct the relay controller box8 Lectures
-
9 - Meet Tkinter10 Lectures
-
10 - Write the Bench Computer application8 Lectures
-
Bench Computer Mk II using the Keyestudio 4 Channel Relay (or similar)12 Lectures
-
[1001] - Introduction
-
[1010] - RPi Bench Computer Mk II demonstration
-
[1030a] - Disassembly planning
-
[1030b] - Disassembly
-
[1040] - A look at the GPIO breakout board
-
[1050a] - A demonstration of the Keyestudio relay board using RPI.GPIO
-
[1050b] - A demonstration of the Keyestudio relay board using pigpio
-
[1060a] - Assembly of RPi Mk II, GPIO breakout board
-
[1060b] - Assembly of RPi Mk II, electrical check
-
[1060c] - Assembly of RPi Mk II, relay board
-
[1065] - Testing the external wiring
-
[1070] - Python Mk II application script walkthrough
-
[1001] - Introduction
-
Conclusion2 Lectures
-
August 2022 update11 Lectures
-
12.10 Introduction to the application update
-
12.20 Backup the SD card
-
12.30 Get current OS and computer versions
-
12.40 Already running Bullseye? update OS
-
12.50 Not running Bullseye: rebuild OS
-
12.60 Setup VNC
-
12.65 Setup XRDP
-
12.70 Copy the application using VNC
-
12.80 Setup DHT22
-
12.90 Setup PIGPIO
-
12.100 Test application
-
12.10 Introduction to the application update
-
How to backup and restore your SD card4 Lectures
Section 1, Lecture 4
In Progress
[0020b] – Required Hardware, Part 2
Section Progress
0% Complete
This list contains items that I used in this course. You probably already have most of these items, and you can always substitute some of them with items that you do have, or others that you think might work better.
For example, you may choose to substitute the 3.5mm audio jacks for banana plugs instead if you already have banana plugs in your drawers. They might actually work better!
Much of what I used, I did because I happened to have them already in my drawers.
Go to the course parts and tools page to see a detailed list.